Premium
Best offers
Quality Assurance
Enjoy 100% Premium Quality Products
Secure Payments
100% Secure Payments by Trusted Payment Gateways
Free Shipping
Free Shipping On All Prepaid orders Above Rs.999
Best Offers
Grab Now
Top-Notch Support
+919979087704 (02pm.to10pm.)
Dual Axis PS2 Joystick Module good quality
₹100.00 ₹50.00
(Excluding of GST 18%)
- Quality joystick, long life, stable performance.
- Highly reliable and compact sized.
- Two channel analog outputs, 1channel digital outputs
- X, Y-axis output of two potentiometers can be read through the AD converter twist angle.
- Press down on the joystick, touch switches can be deployed all the way as a digital output.
Features
- 2.54mm pin interface leads
- Operating Voltage: 5V.
- Long service life and stable performance
- Standard interface and electronic building blocks
- Widely use in Arduino DIY projects
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction.
![](https://scienticy.com/wp-content/uploads/2023/02/secure-payment-b.png)
Dual Axis PS2 Joystick Module
- This is a dual axis high quality JoyStick Module . It can be used to sense movements in 2 directions(axes). It also has a inbuilt switch which can be activated by pressing the stick.Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each.
- Joystick Module 2-axis for Arduino can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”. It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.
- Dual Axis PS2 Joystick module has 5 pins, i.e., GND, VCC, VRX, VRY and SW. The GND pin is connected to the ground of the circuit, whereas Vcc is connected to the power supply. VRx and VRY pins retrieve the analog signal, which contains the position coordinates of the X-axis and Y-axis, respectively. SW is connected to the push button.
- This Joystick Module uses pin interface leads of 2.54mm. The operating voltage for the module is 5V.
- The main application of the Two-Axis Joystick module is controlling robots, pan control for the camera, game controllers, etc.
SPECIFICATIONS
Type | Joystick |
Operating Voltage | 5V |
Dimensions | 36 x 28 x 30 (LxWxH) mm. |
Pin interface leads | 2.54mm |
Number of Pins | 5 |
Potentiometer Value | 10k |
Make | Make in India |
Features
- 2.54mm pin interface leads
- Operating Voltage: 5V.
- Long service life and stable performance
- Standard interface and electronic building blocks
- Widely use in Arduino DIY projects
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction.
Package Includes
- 1 x Dual Axis PS2 Joystick Module
Weight | 20 g |
---|---|
Dimensions | 3.4 × 2.6 × 4 cm |
Related products
-
TP4056 Lithium Battery Charging Module With Protection Best quality
₹50.00₹25.00Add to cartApplication of TP4056 module
- Scienticy- electronics & electric models/Projects
- Cellular Telephones, PDAs, GPS
- Charge and Discharge Lithium cells
- USB Bus-Powered Chargers, Chargers
- Used with 5V booster for powering Arduino projects
-
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticy
₹300.00₹250.00Add to cartDescription The E18-D80NK Adjustable Infrared Sensor Switch 3-80 cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80 cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to …
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticyRead More
-
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy original
₹950.00₹670.00Add to cartArduino Uno R3 ATmega328P The Arduino Uno R3 is a open source micro controller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a micro controller reset button. It contains …
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy originalRead More
-
TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board best quality
₹130.00Add to cart- Dual/Single 4.2V/8.4V Li-ion Battery Charger
- Input Voltage: 5V to 18V
- Programmable Charge Current: 0.1A to 2A
- Chip temperature protection, Overcurrent protection, undervoltage protection
- Reverse Battery Shutdown, and short circuit protection
- Trickle, constant current, constant voltage charging 3 states of charging
Reviews
There are no reviews yet.