Premium
Category: Modules
Showing 1–16 of 22 results
-
Sale!
2 Channel 5V Relay Module With Optocoupler Protection_good quality
₹110.00Add to cart- 5V 2-Channel Relay interface board, and each one needs 15-20mA DriverCurrent
- Equiped with high-current relay, AC250V 10A ; DC30V 10A the 8550 transistor drive, drive ability
- Working voltage 5 V
- Has the fixed bolt hole and easy installation
- Standard interface that can be controlled directly by microcontroller
- Indication LED’s for Relay output status
-
Sale!
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module good quality
₹158.00Add to cart- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
-
5V-30V Delay Relay Timer Module best Trigger Delay Switch Micro USB Power Adjustable Relay Module
₹190.00Add to cart- Wide voltage 5V-30V.
- Time can be adjusted via a potentiometer, meeting your most occasions.
- Micro USB 5.0V power supply with input, easy to use..
- 5–30V wide supply voltage.
- External triggering and onboard buttons Two triggering methods.
- With a relay pull-in indicator.
-
Sale!
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best quality
₹390.00Add to cartArduino Nano Board R3 This board is fully compatible with Arduino Nano. It is based on the ATmega328p-AU from the atmel, the SMD version of one used in Arduino Uno. The advantage of this module, is that is very small in size as compared to Arduino Uno. It has integrated USB, and is breadboard friendly. …
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best qualityRead More
-
Sale!
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy original
₹670.00Add to cartArduino Uno R3 ATmega328P The Arduino Uno R3 is a open source micro controller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a micro controller reset button. It contains …
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy originalRead More
-
Digital LDR Module – 3 Pin good quality
₹90.00Add to cartQUICK OVERVIEW
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
-
Sale!
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control Pack of 1 Good quality
₹135.00Add to cart– Can be easily detected and set the dummy bit server, jitter and median.
– Can be connected to two servos or ESC; MCU control, good stability, high accuracy.
– Turn the knob, steering can be detected.
– If you connect the electronic governor (brush or brushless available), you can get rid of the remote control device for manual control, for testing tone.
– Speed or motor performance is very practical, no longer cumbersome connecting the remote control and the receiver.
– It is equivalent to a “Hand Dynamic Receiver “feature, playing rudder knob analog transmitters. -
Sale!
Dual Axis PS2 Joystick Module good quality
₹50.00Add to cart- Quality joystick, long life, stable performance.
- Highly reliable and compact sized.
- Two channel analog outputs, 1channel digital outputs
- X, Y-axis output of two potentiometers can be read through the AD converter twist angle.
- Press down on the joystick, touch switches can be deployed all the way as a digital output.
Features
- 2.54mm pin interface leads
- Operating Voltage: 5V.
- Long service life and stable performance
- Standard interface and electronic building blocks
- Widely use in Arduino DIY projects
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction.
-
Sale!
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticy
₹250.00Add to cartDescription The E18-D80NK Adjustable Infrared Sensor Switch 3-80 cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80 cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to …
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticyRead More
-
Sale!
HC-SR04 Ultrasonic Sensor Distance Module for All Type of Development Board and robot good quality
₹98.00Add to cart- HC-SR04 Ultrasonic Sensor
- Power Supply :5V DC
- Quiescent Current : <2mA
- Effectual Angle: <15°
- Ranging Distance : 2cm – 500 cm
- Resolution : 0.3 cm
- Mode of Connection: VCC/ trig(T)/ Echo(R)/ GND
- (VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.)
-
Sale!
Single Channel 5V Relay Module best quality
₹70.00Add to cart- No. of Channels : 1
- Operating Voltage: 5 V
- Max Current : 20 mA
- Relay Contact Current Capacity at 250 V AC: 10 A
- Relay Contact Current Capacity at 30 V DC: 10 A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
