TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board best quality
₹130.00
(Excluding of GST 18%)
- Dual/Single 4.2V/8.4V Li-ion Battery Charger
- Input Voltage: 5V to 18V
- Programmable Charge Current: 0.1A to 2A
- Chip temperature protection, Overcurrent protection, undervoltage protection
- Reverse Battery Shutdown, and short circuit protection
- Trickle, constant current, constant voltage charging 3 states of charging
In stock
Available Offers
► Free Shipping : On over value Rs.999
► Tax invoice : Get GST invoice and save up to 18% on business purchases
₹130.00
1 - 4
pieces
₹110.00
(15% off)
5 - 8 pieces
₹100.00
(23% off)
9+ pieces
Description
- TP5100 is a step down double 8.4V/4.2V single lithium battery charge management module. It has in-built overcurrent, under voltage, short circuit protection. Along with this it also provides over temperature, and reverse battery shutdown protection.
- The TP5100 Module can charge either single or double lithium ion cell battery. It has wide input voltage range of 5V to 18V. It has Maximum charging current of 2A.
- The TP5100 Module has frequency of 400Khz switching mode. So it becomes possible to use smaller capacitors, and peripherals. And also enables maintaining of smaller amount of heat in high current charging. It has charging indicator LED.
- The default charging mode is for 4.2V. To enable the 8.4V Charging mode, the SET pin needs to be soldered.
- Overcurrent protection
- Under-voltage protection
- Over-temperature protection
- Short circuit protection
- Battery temperature monitoring
- Reverse polarity protection.
Features:
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
-
Double 8.4v / 4.2v lithium rechargeable single .
-
Programmable charge current. 0. 1A-2A.
-
Programmable steady precharge current 10% -100%.
-
Wide operating voltage, maximum reach I8V.
-
Red and green LED charge status indicator.
-
Chip temperature protection, overcurrent protection, under-voltage protection.
-
Battery temperature protection, reverse battery shutdown, short circuit protection.
-
Switching frequency 400Khz, usable inductance 20uH, and more.
-
PWR_ON Power battery for switching control.
SPECIFICATION
| Model | TP5100 |
| Input Supply voltage | 5 ~ 15V DC |
| Programmable charge current | 0.1 ~ 2 A. |
| Length (mm) | 26 |
| Width (mm) | 18 |
| Height (mm) | 5 |
Package Includes:
- 1 x TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board
| Weight | 10 g |
|---|---|
| Dimensions | 2.6 × 1.8 × 0.5 cm |
Related products
-
5V-30V Delay Relay Timer Module best Trigger Delay Switch Micro USB Power Adjustable Relay Module
₹190.00Add to cart- Wide voltage 5V-30V.
- Time can be adjusted via a potentiometer, meeting your most occasions.
- Micro USB 5.0V power supply with input, easy to use..
- 5–30V wide supply voltage.
- External triggering and onboard buttons Two triggering methods.
- With a relay pull-in indicator.
Reviews
There are no reviews yet.