TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board best quality
₹130.00
(Excluding of GST 18%)
- Dual/Single 4.2V/8.4V Li-ion Battery Charger
- Input Voltage: 5V to 18V
- Programmable Charge Current: 0.1A to 2A
- Chip temperature protection, Overcurrent protection, undervoltage protection
- Reverse Battery Shutdown, and short circuit protection
- Trickle, constant current, constant voltage charging 3 states of charging
In stock

Description
- TP5100 is a step down double 8.4V/4.2V single lithium battery charge management module. It has in-built overcurrent, under voltage, short circuit protection. Along with this it also provides over temperature, and reverse battery shutdown protection.
- The TP5100 Module can charge either single or double lithium ion cell battery. It has wide input voltage range of 5V to 18V. It has Maximum charging current of 2A.
- The TP5100 Module has frequency of 400Khz switching mode. So it becomes possible to use smaller capacitors, and peripherals. And also enables maintaining of smaller amount of heat in high current charging. It has charging indicator LED.
- The default charging mode is for 4.2V. To enable the 8.4V Charging mode, the SET pin needs to be soldered.
- Overcurrent protection
- Under-voltage protection
- Over-temperature protection
- Short circuit protection
- Battery temperature monitoring
- Reverse polarity protection.
Features:
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A.
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under-voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH, and more.
- PWR_ON Power battery for switching control.
SPECIFICATION
Model | TP5100 |
Input Supply voltage | 5 ~ 15V DC |
Programmable charge current | 0.1 ~ 2 A. |
Length (mm) | 26 |
Width (mm) | 18 |
Height (mm) | 5 |
Package Includes:
- 1 x TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board
Weight | 10 g |
---|---|
Dimensions | 2.6 × 1.8 × 0.5 cm |
Related products
Universal battery charger useful for 18650 17650 16340 14500 10440 AA & AAA sizes Single Cell Li ion battery
₹210.00Add to cartDescription: This is a universal battery charger for 18650, 16340, 14500 Li-ion rechargeable battery chargers. Universal battery charger-Features: Home Travel Wall AC Multi-functional Universal Battery Charger Automatically stops when charging is complete Red/Orange light when charging, full of turns green, auto stop charging Designed to charge your batteries quickly and safely Wide range charging voltage …
Arduino UNO Cable USB Type-A to Type-B Male 30cm (Blue) best quality
₹50.00Add to cartArduino UNO Cable This cable is For Arduino UNO (USB A to B) that we can use to connect Arduino Uno or any board with the USB female A port of your computer. This is a standard-issue USB 2.0 cable which is the kind that’s usually used for printers etc. It is Compatible with most SFE designed …
Arduino UNO Cable USB Type-A to Type-B Male 30cm (Blue) best qualityRead More
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticy
₹300.00Original price was: ₹300.00.₹250.00Current price is: ₹250.00.Add to cartDescription The E18-D80NK Adjustable Infrared Sensor Switch 3-80 cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80 cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to …
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticyRead More
Reviews
There are no reviews yet.