TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board best quality
₹130.00
(Excluding of GST 18%)
- Dual/Single 4.2V/8.4V Li-ion Battery Charger
- Input Voltage: 5V to 18V
- Programmable Charge Current: 0.1A to 2A
- Chip temperature protection, Overcurrent protection, undervoltage protection
- Reverse Battery Shutdown, and short circuit protection
- Trickle, constant current, constant voltage charging 3 states of charging
In stock
Description
- TP5100 is a step down double 8.4V/4.2V single lithium battery charge management module. It has in-built overcurrent, under voltage, short circuit protection. Along with this it also provides over temperature, and reverse battery shutdown protection.
- The TP5100 Module can charge either single or double lithium ion cell battery. It has wide input voltage range of 5V to 18V. It has Maximum charging current of 2A.
- The TP5100 Module has frequency of 400Khz switching mode. So it becomes possible to use smaller capacitors, and peripherals. And also enables maintaining of smaller amount of heat in high current charging. It has charging indicator LED.
- The default charging mode is for 4.2V. To enable the 8.4V Charging mode, the SET pin needs to be soldered.
- Overcurrent protection
- Under-voltage protection
- Over-temperature protection
- Short circuit protection
- Battery temperature monitoring
- Reverse polarity protection.
Features:
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A.
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under-voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH, and more.
- PWR_ON Power battery for switching control.
SPECIFICATION
| Model | TP5100 |
| Input Supply voltage | 5 ~ 15V DC |
| Programmable charge current | 0.1 ~ 2 A. |
| Length (mm) | 26 |
| Width (mm) | 18 |
| Height (mm) | 5 |
Package Includes:
- 1 x TP5100 4.2v and 8.4v Single/ Double Lithium Battery Charging Board
| Weight | 10 g |
|---|---|
| Dimensions | 2.6 × 1.8 × 0.5 cm |
Related products
- Sale!
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best quality
Original price was: ₹550.00.₹390.00Current price is: ₹390.00.Add to cartArduino Nano Board R3 This board is fully compatible with Arduino Nano. It is based on the ATmega328p-AU from the atmel, the SMD version of one used in Arduino Uno. The advantage of this module, is that is very small in size as compared to Arduino Uno. It has integrated USB, and is breadboard friendly. …
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best qualityRead More
- Sale!
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticy
Original price was: ₹300.00.₹250.00Current price is: ₹250.00.Add to cartDescription The E18-D80NK Adjustable Infrared Sensor Switch 3-80 cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80 cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to …
E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range best by scienticyRead More
Reviews
There are no reviews yet.