R365 Diaphragm Based Water Pump 6-12V DC best quality product
₹218.00
(Excluding of GST 18%)
- Small Size Diaphragm Pump
- High Flow Rate
- Maintenance Free
- Low Noise Level
- Robust Construction
In stock

R365 Diaphragm Based Water Pump
R365 6-12V DC Diaphragm Based Water pump can be used to water dispenser for pot ,water your plants, make a fountain or waterfall, and even change your fish tank water.(Useful product of scienticy) It can also be used in vending machines, plant watering systems and much more. The pump can handle liquids up to a temperature of 80°C and it can suck water through the tube from up to 2m and pump water vertically for up to 3m.
It requires between 6 – 12 volt DC and between 0.5 – 0.7 ampere. It delivers its maximum operating values when power is at the upper end of these ranges.
Specifications
Model | R365 |
Voltage Rating | 6-12V DC |
No Load Current | 0.23A |
Maximum Flow | 2-3 liters / minute |
Maximum pressure at the outlet | 1-2.5 kg |
Current Range | 0.5-0.7 A |
Maximum Lift | 3 Meter |
Maximum Suction | 2 Meter |
Pump Dimension (LxD) | 78×35(mm) |
Input Tube Diameter | 6 mm |
Output Tube Diameter | 6 mm |
Maximum Current at Start | 2A |
Package Includes
- 1 x R365 Diaphragm Based Water Pump 6-12V DC
Weight | 100 g |
---|---|
Dimensions | 7.8 × 3.5 × 3.5 cm |
Related products
TP4056 Lithium Battery Charging Module With Protection Best quality
₹50.00Original price was: ₹50.00.₹25.00Current price is: ₹25.00.Add to cartApplication of TP4056 module
- Scienticy- electronics & electric models/Projects
- Cellular Telephones, PDAs, GPS
- Charge and Discharge Lithium cells
- USB Bus-Powered Chargers, Chargers
- Used with 5V booster for powering Arduino projects
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy original
₹950.00Original price was: ₹950.00.₹670.00Current price is: ₹670.00.Add to cartArduino Uno R3 ATmega328P The Arduino Uno R3 is a open source micro controller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a micro controller reset button. It contains …
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy originalRead More
Arduino UNO Cable USB Type-A to Type-B Male 30cm (Blue) best quality
₹50.00Add to cartArduino UNO Cable This cable is For Arduino UNO (USB A to B) that we can use to connect Arduino Uno or any board with the USB female A port of your computer. This is a standard-issue USB 2.0 cable which is the kind that’s usually used for printers etc. It is Compatible with most SFE designed …
Arduino UNO Cable USB Type-A to Type-B Male 30cm (Blue) best qualityRead More
Soil Moisture Sensor Module Kit with powerful LM393
₹90.00Add to cart- Soil Moisture Detection Humidity Sensor Module
- Operating voltage: 3.3V~5V
- With power indicator (red) and digital switching output indicator (green)
- Panel PCB Dimension: Approx.3cm x 1.5cm
- Soil Probe Dimension: Approx. 6cm x 3cm
- Cable Length: Approx.21cm
- FC-28 with LM393
Reviews
There are no reviews yet.