Premium
![Crocodile Clips -black- 45mm 10A [High Quality] (Alligator / test Lead)](https://scienticy.com/wp-content/uploads/2023/09/DC-Crocodile-Clips-black-320x320.jpg)
R365 Diaphragm Based Water Pump 6-12V DC best quality product
₹218.00
(Excluding of GST 18%)
- Small Size Diaphragm Pump
- High Flow Rate
- Maintenance Free
- Low Noise Level
- Robust Construction
In stock
R365 Diaphragm Based Water Pump
R365 6-12V DC Diaphragm Based Water pump can be used to water dispenser for pot ,water your plants, make a fountain or waterfall, and even change your fish tank water.(Useful product of scienticy) It can also be used in vending machines, plant watering systems and much more. The pump can handle liquids up to a temperature of 80°C and it can suck water through the tube from up to 2m and pump water vertically for up to 3m.
It requires between 6 – 12 volt DC and between 0.5 – 0.7 ampere. It delivers its maximum operating values when power is at the upper end of these ranges.
Specifications
| Model | R365 |
| Voltage Rating | 6-12V DC |
| No Load Current | 0.23A |
| Maximum Flow | 2-3 liters / minute |
| Maximum pressure at the outlet | 1-2.5 kg |
| Current Range | 0.5-0.7 A |
| Maximum Lift | 3 Meter |
| Maximum Suction | 2 Meter |
| Pump Dimension (LxD) | 78×35(mm) |
| Input Tube Diameter | 6 mm |
| Output Tube Diameter | 6 mm |
| Maximum Current at Start | 2A |
Package Includes
- 1 x R365 Diaphragm Based Water Pump 6-12V DC
| Weight | 100 g |
|---|---|
| Dimensions | 7.8 × 3.5 × 3.5 cm |
Related products
-
Sale!
TP4056 Lithium Battery Charging Module With Protection Best quality
₹25.00Add to cartApplication of TP4056 module
- Scienticy- electronics & electric models/Projects
- Cellular Telephones, PDAs, GPS
- Charge and Discharge Lithium cells
- USB Bus-Powered Chargers, Chargers
- Used with 5V booster for powering Arduino projects
-
5V-30V Delay Relay Timer Module best Trigger Delay Switch Micro USB Power Adjustable Relay Module
₹190.00Add to cart- Wide voltage 5V-30V.
- Time can be adjusted via a potentiometer, meeting your most occasions.
- Micro USB 5.0V power supply with input, easy to use..
- 5–30V wide supply voltage.
- External triggering and onboard buttons Two triggering methods.
- With a relay pull-in indicator.
-
Sale!
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best quality
₹390.00Add to cartArduino Nano Board R3 This board is fully compatible with Arduino Nano. It is based on the ATmega328p-AU from the atmel, the SMD version of one used in Arduino Uno. The advantage of this module, is that is very small in size as compared to Arduino Uno. It has integrated USB, and is breadboard friendly. …
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best qualityRead More
Reviews
There are no reviews yet.