Premium
5V-30V Delay Relay Timer Module best Trigger Delay Switch Micro USB Power Adjustable Relay Module
₹190.00
(Excluding of GST 18%)
- Wide voltage 5V-30V.
- Time can be adjusted via a potentiometer, meeting your most occasions.
- Micro USB 5.0V power supply with input, easy to use..
- 5–30V wide supply voltage.
- External triggering and onboard buttons Two triggering methods.
- With a relay pull-in indicator.
In stock
Delay Relay Timer Module
- Working voltage: Wide voltage any voltage between 5-30V, Micro USB power connector and two solder terminals
- Operating mode: feed the module power, output of the module state: normally open (NO) and the common terminal (COM) disconnected, normally closed (NC) and the common terminal (COM) is turned on.
- Originating outside the contact (TRIG) to a low pulse signal, or touch trigger button and instantly, the relay and, working lights, this time,
- the status of the relay output: normally open (NO) and the common terminal (COM) is turned on, Normally Closed (NC) and the common terminal (COM) is disconnected after 0-24 seconds (this time can be adjusted according to your needs) relay opens after the bell, then relay back to the state before the trigger.
- The Delay Relay Timer Module can be adjusted via a potentiometer, default 0-24 seconds.
- The module can be controlled: 10A 250VAC (AC), 10A 30VDC (direct current) following loads.
- With a relay indicator.
- Has freewheeling protection relay.
- Size: 5.4 * 1.9 * 1.8cm (L * W * H)
Applications:
- The anti-theft alarm delay, building sound and light control lamp switch.
- The vehicle-mounted device is turned on delay, to prevent excessive current when the car ignition burned-board equipment.
- The need to have in order to start the case, to prevent multiple devices simultaneously starting current is too large burning appliances.
- scienticy-innovative product
How to use/work-click here
Package includes:
- 1 x 5V-30V Delay Relay Timer Module Trigger Delay Switch Micro USB Power Adjustable Relay Module
| Weight | 50 g |
|---|---|
| Dimensions | 5.4 × 1.9 × 1.8 cm |
You may also like…
Related products
-
Sale!
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy original
₹670.00Add to cartArduino Uno R3 ATmega328P The Arduino Uno R3 is a open source micro controller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, Onboard 16 MHz ceramic resonator, Port for USB connection, Onboard DC power jack, An ICSP header and a micro controller reset button. It contains …
Arduino Uno R3 ATmega328P Arduino Compatible – DIP (without cable) buy originalRead More
-
Arduino UNO Cable USB Type-A to Type-B Male 30cm (Blue) best quality
₹50.00Add to cartArduino UNO Cable This cable is For Arduino UNO (USB A to B) that we can use to connect Arduino Uno or any board with the USB female A port of your computer. This is a standard-issue USB 2.0 cable which is the kind that’s usually used for printers etc. It is Compatible with most SFE designed …
Arduino UNO Cable USB Type-A to Type-B Male 30cm (Blue) best qualityRead More
-
Sale!
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best quality
₹390.00Add to cartArduino Nano Board R3 This board is fully compatible with Arduino Nano. It is based on the ATmega328p-AU from the atmel, the SMD version of one used in Arduino Uno. The advantage of this module, is that is very small in size as compared to Arduino Uno. It has integrated USB, and is breadboard friendly. …
Arduino Nano Board R3 without USB Cable Compatible with Arduino (Unsoldered) best qualityRead More
Reviews
There are no reviews yet.